Used for waterproofing poured and block foundation walls, insulated concrete forms (ICF), footings, split slab floors, and retaining walls for residential construction.
Waterproofing Features
- Seamless Low modulus elastomeric membrane.
- Retains flexibility over a wide temperature range
- Excellent adhesion to most construction surfaces such as concrete, stone, wood, preserved wood, metal, and polystyrene insulation (ICF).
- Can be applied to damp or green concrete.
- Bridges cracks
- Contains no solvent and is environmentally friendly.
- Can be applied in one coat or in multiple coats or in multiple coats with reinforcing fabric (CAN/CGSB-37.3).
Uses
Used for waterproofing poured and block foundation walls, insulated concrete forms (ICF), footings, split slab floors, and retaining walls for residential construction.
Physical Properties
Colour
Black
Solids by volume
60% (approx.)
Weight
1.0 kg/L (8.4 lbs/U.S. gal)
Coverage (per coat)
0.5 to 2 L/m2 (1.2 to 5 U.S. gal/100 ft2)
Drying Time
50% R.H. 20oC (68oF) 24 hours minimum
Application Temperature
5oC (40oF) minimum
Service Temperature
Minus 40oC to 60oC (-40oF to 140oF)
Tensile Strength
320 kPa (typical)
(ASTM D412)
(50 psi)
Elongation
2000% (typical)
(ASTM D412)
Peel strength after 7 days
735 N/m (typical)
Water immersion
(4.2 lbs/in.)
(ASTM D3330 Modified)
Maximum VOC
10 g/L
Low Temperature Flexibility
No cracking, flaking or loss of adhesion
(CAN/CGSB 37.2M)
Water Vapour Permeance
(ASTM E96)
10 ng/Pa.m2 .s (0.2 perms)
Water Resistance (ASTM D466)
No re-emulsification or loss of adhesion
Flammability
Wet
Non-Flammable
Dry
Burns
Chemical Resistance
Resistant to mild acids, alkalis, salt and calcium chloride solutions.
